Tune your bike to the limit with our advanced ECU Flashing Products for Kawasaki, Honda, Suzuki, BMW, Ducati, Harley Davidson, Triumph, KTM, Husqvarna and Yamaha motorcycles.
Woolich Racing - Tune your bike to the limit
CONTACT US
Login  - 

Resetting Device Firmware on v3 Interfaces


If there is a problem with the Device Firmware Update or you need to reset the Device Firmware, follow the procedure detailed below. This procedure is for v3 Interfaces ONLY (ie. Log Box v3 or USB v3) and forces the device into 'Bootloader Mode' allowing Firmware Installation.  Please ensure that you have a strong and stable internet connection during the update process.
         

1. Unplug the Device from the USB cable.
2. Put the Interface into Bootloader mode by moving the mode switch to the Left Hand Side Position.
 
3. Plug the USB cable back into the Interface and computer.
4. When the Device is in Bootloader mode all LED's will flash.

NOTE: For some devices with software will then automatically update the firmware and show the following screen: 

5. Open the "Tools" > "Device Configuration" screen in the WRT software.


6. You will be prompted that it is not the latest firmware. It will always display this as the Device is now in
Bootloader mode.
7. Click Update Firmware and follow the on screen prompts.
8. You will be prompted to set the Device into Bootloader mode. Follow the on screen prompts by simply
removing the USB cable and ensure the switch is on the Left Hand Side Position, connect the USB cable, wait for
the Device to be recognised in Windows, then click Continue.


 
9.  You will be prompted to Reset the Device. Follow the on screen prompts by simply removing the USB cable
and move the switch to the Right Hand Side Position, connect the USB cable, wait for the Device to be
recognised in Windows, then click Continue.



10.   Once completed check the Device for correct operation.

Note: If you still have issue's updating the firmware on v3 Log Boxes remove and reinsert the Micro SD Card and start the process again. You may need to reformat the Micro SD Card (as FAT32) in an external card reader if it is not visible in windows explorer. 
A faulty Micro SD may cause the firmware not to update, or the Log Box may appear non-responsive.



Was this helpful?
Back To Support Center

 
OUR PRODUCTS SUPPORT OUR COMPANY  
Suzuki ECU Flashing
Kawasaki ECU Flashing
Honda ECU Flashing
Yamaha ECU Flashing
BMW ECU Flashing
Ducati ECU Flashing
Harley Davidson ECU Flashing
Triumph ECU Flashing
KTM ECU Flashing
Husqvarna ECU Flashing
Woolich Racing Merchandise
What Harness for Bike?
What Bike uses Harness?
Woolich Racing Tuned (WRT) software
Woolich Racing MapShare
USB D (Denso)
Log Box D (Denso)
USB M (Mitsubishi)
Log Box M (Mitsubishi)
Zeitronix Wideband O2 Products
Tuning Shops and Dealers
Support Center
Training
Support Tickets
Video Tutorials
User Guides and Installation Instructions
Dyno Tuning Motorcycles
Bikes Required for Development
COM Port Drivers
Software Release Notes
User Support
Contact Us
About Us
Official Technical Partner WorldSBK
Electronic Mapping - Plug and Play Performance
Woolich Racing News
Testimonials
Terms and Conditions
Privacy Policy
Mobile Site
Woolich Racing page on facebook
Woolich Racing on YouTube.com
Woolich Racing Products are Intended for RACE USE on CLOSED CIRCUIT ONLY

© Woolich Racing and www.WoolichRacing.com, 2011-2025. Unauthorized use or duplication of any of the material on this website without express and written permission from this website’s author and owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Woolich Racing and www.WoolichRacing.com with appropriate and specific direction to the original content.