This article is only valid for legacy communication interfaces such as USB and Log Box v1 and v2. This does not apply to v3 communication interfaces such as USB v3 or Log Box v3.
Generally Windows will automatically recognize the Woolich Racing communication interfaces and install the appropriate COM port drivers automatically for you.
The following procedure is for cases where the drivers are not automatically installed.
-
Log into Windows as an Administrator
-
Open the Woolich Racing Tuned Software
-
From the 'Tools' menu choose 'Install COM Port Drivers’
-
A command window will open and install the FTDI COM Port Drivers
-
Reboot Windows when the command window has closed
-
Log into Windows as an Administrator
-
Plug your Woolich Racing Log Box or USB Interface into the USB Port on the PC
-
Windows should automatically detect the USB Serial Port and install and configure it
-
Open 'Device Manager' and expand the 'Ports (COM & LPT)' section to check that the USB Serial Port is available and configured
-
Take note of the COM port number that has been assigned to the USB Serial Port.
Note:
Some computers do not work well when the USB Serial Port in your interface is set to a COM Port number greater than 9. Click here to see a guide on how to change the COM Port Number.
These Support Center articles may also be of interest to you: