Woolich Racing Log Box D v3 (Denso)
The Woolich Racing Log Box D (Denso) (LBD) automatically logs engine data directly from stock Denso ECUs
to an on-board micro SD card every time you ride your bike. The Log Box
can be permanently installed on your bike. When you are ready to tune your bike you can
connect a laptop to the Log Box via a standard USB cable. The log box
appears as an external USB hard disk on your laptop and you can load the logged
data directly into the Woolich Racing Tuned software
to AutoTune your fuel maps.
The Log Box (Denso) LBD also allows you to Read/Write (Flash) Denso ECU's and view real time Engine Data in the Woolich Racing Tuned (WRT) software.
Features
- Built in ECU Flashing Interface for Denso ECU's
- Real Time Engine Data available in Woolich Racing Tuned software
- Log Engine Data and Wideband O2 AFR to on board micro SD
- Open Engine Data Logs in Woolich Racing AutoTune to tune your Fuel Maps
- 2GB micro SD card (over 100 hours of data log capacity)
- On board 3v battery to allow date and time stamp for Log Files
Connectivity
- 1 * Standard USB Connector for connecting to computer
- 1 * Standard Woolich Racing 8 pin Connector (works with all existing Woolich Racing Harnesses)
- 1 * RJ12 connector for direct connection to Zeitronix Wideband O2 controllers
Performance
- 50Hz Engine Data logging to micro SD card * (i.e. every 20 ms)
- 50Hz direct digital connection to Zeitronix Wideband O2 controllers
Size
| |
Length: |
77.0mm (3.0") |
| |
Width: |
37.8mm (1.5") |
| |
Depth: |
25.8mm (1.0") |
* The standard engine data connection speed vaires depending on manufacturer and
model. Some models have a "Fast Data Logging" option in Advanced Settings in WRT
The 50Hz Data Logging rate is for the Wideband O2 data from the Zeitronix, linear interpolation
is used to produce data logs between the engine data packets from the ECU.