|
|
| Product
|
Description
|
Price
|
|
2015-2025 Kawasaki H2 Racetools
The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock ECU. The package includes: - High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern.
- Shift rod for standard shift configuration*
- Kawasaki Race Tools Type 5 which allows the quickshifter to be plugged into the bikes wiring harness**
- Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software.
Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Pit Speed Limiter RPM can be configured.** Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Engine Warm up parameters are fully configurable. ** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. ** The Pit Speed Limiter and Engine Warm Up requires the purchase of an additional Pit Speed Limiter Harness.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
|
2015-2025 Kawasaki H2 Racetools Key Only
This item is for the Race Tools Key Only, it allows you to enable Woolich Racing Race Tools using the stock Shift Sensor from 2018-2025 Models Only. This does not work with the stock Shift Sensor from 2015-2017 models.
No Hardware is included with this item.The Race Tools package allows you to enable Quickshifter and Autoblipper, Engine Warm Up, Pit Speed Limiter and Launch Control in the Stock ECU. The package includes: - Fully Adjustable Quickshifter
- Fully Adjustable Autoblipper
- Engine Warm Up Feature (requires Pit Speed Limiter harness)
- Pit Speed Limiter (requires Pit Speed Limiter harness)
- Launch Control
Part number for OEM Kawasaki Quickshifter - 21176-0838
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
|
2015-2017 H2 Launch Control Key
Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU.
If you already have a Quickshifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
|
Kawasaki Pit Speed Limiter Harness Type 1
The Kawasaki Pit Speed Limiter harness plugs into the bike's Exhaust Valve Plug and allows the rider to enable the Pit Speed Limiter and, where available, the Engine Warm Up feature.
The Kawasaki Pit Speed Limiter has to be used in conjunction with the relevant Woolich Racing Race Tools package.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
|
|
|
|
|
Bin File Definitions - for use in Woolich Racing Tuned software
|
|
Product
|
Description
|
Price
|
|
2015-2025 Kawasaki H2 Bin File Definition
Purchase this item to gain access in the Woolich Racing Tuned software to the bin files for the 2015-2025 Kawasaki H2.
Note: The WRT software is only available to verified
Woolich accounts. We only verify customer accounts that have purchased
the necessary products (Woolich Log Box or USB interface, along with the
appropriate harness and -if required- a bin file definition key) to
flash their ECU. Accounts with no purchases of the required products can
not be verified.
AU$
110.00
Features available for Kawasaki H2 2015-2026 - IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Ignition Dwell Map/s
- Electronic Throttle Valve (ETV) Maps
- Fuel Trim Map/s
- Idle RPM
- RPM Limiter
- Fan Temperature
- Autoblipper - (Requires Race Tools)
- Disable Stock O2 Sensor
- Disable Deceleration Fuel Cut
- Disable Exhaust Valve
- Disable PAIR Valve / AIS
- Disable Top Speed Limiter
- Engine Braking Control Maps
- Enable Race Dash
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers: - 21175-0956 FG1271B
- 21175-0963 FG1272A
- 21175-0963 FG1272B
- 21175-0963 FG1282A
- 21175-0964 FG1273A
- 21175-0964 FG1273B
- 21175-0987 F503328
- 21175-0987 FG1274A
- 21175-0987 FG1274B
- 21175-0988 FG1275A
- 21175-0988 FG1275B
- 21175-1109 FG1277B
- 21175-1117 FG1278A
- 21175-1157 FG1976C
- 21175-1168 FG1281A
- 21175-1169 FG1282A
- 21175-1170 FG1283A
- 21175-1171 FG1284A
- 21175-1171 FG2385C
- 21175-1172 FG1285A
- 21175-1174 FG1287A
- 21175-1232 FG2371B
- 21175-1233 FG2372B
- 21175-1234 FG2374B
- 21175-1296 FG2375B
- 21175-1297 FG2376B
- 21175-1455 FG2384C
- 21175-1456 FG2389C
- 21175-1457 FG2390C
- 21175-1458 FG2382C
- 21175-1459 FG2387C
- 21175-1478 FG2386C
|
|
|
Harnesses
|
|
Product
|
Description
|
Price
|
|
Extension Harness Long
The Extension Harness - Long is a 8 pin Molex (male) to 8 Pin Molex (female) entension harness 1100mm long that allows you to extend the length of all Woolich Racing Harnesses.
|
Extension Harness Short
The Extension Harness - Short is a 8 pin Molex (male) to 8 Pin Molex (female) extension harness 600mm long that allows you to extend the length of all Woolich Racing Harnesses.
|
Kawasaki Harness Type 17b (KH17B + KEH13B/17B)
On Bike Harness for 2018-2021 Kawasaki H2/H2R HS-SX. Allows connection between Woolich Racing v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: - Kawasaki Harness Type 17B (Main)
- Kawasaki Extension Harness Type 17b/13b
* Some H2 models require the Kawasaki Harness Type 13b. Please contact us with your ECU part number so we can send you the correct harness.
|
Kawasaki Extension Harness Type 17b (KEH13B/17B)
The Kawasaki Extension Harness Type 17b is the 1 wire harness part of the Kawasaki Harness Type 13b that is left on the bike. You can purchase additional 17b Extension Harnesses to tune additional bikes.
Includes: Kawasaki Extension Harness Type 17b
|
Kawasaki Harness Type 13b (KH13A/13B/13C + KEH13B/17B)
On Bike Harness for 2015-2020 Kawasaki H2/H2R. Allows connection between Woolich Racing v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: - Kawasaki Harness Type 13 (Main)
- Kawasaki Extension Harness Type 13b
* Some H2 models require the Kawasaki Harness Type 17b. Please contact us with your ECU part number so we can send you the correct harness.
|
Kawasaki Extension Harness Type 13b (KEH13B/17B)
The Kawasaki Extension Harness Type 13b is the 1 wire harness part of the Kawasaki Harness Type 13b that is left on the bike. You can purchase additional 13b Extension Harnesses to tune additional bikes. Includes: Kawasaki Extension Harness Type 13b
|
Kawasaki Bench Harness Type 13 (KBH13)
This bench flashing harness allows you to flash 2016-2020 ZX10R and 2015-2021 H2 / H2R ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface.
|
12V Bench Flashing Power Supply with Type A Plug (USA, Canada, Japan)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
12V Bench Flashing Power Supply with Type C plug (Europe, Asia)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
12V Bench Flashing Power Supply with Type I plug (AU, NZ, China)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
12V Bench Flashing Power Supply with Type G plug (UK, Malaysia & Singapore)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type G plug used in the UK, Ireland, Malaysia & Singapore. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
Kawasaki O2 Eliminator Type 1 (KO2-E1)
The Woolich Racing O2 Eliminator allows you to remove the O2 Sensor/s from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - 2016-2020 ZX-10R - 2021-2024 ZX10R - 2015-2016 H2 - 2020-2021 Z H2 - 2018-2021 H2 SX - 2020-2021 Versys 1000 - 2024 ZX6R
|
Kawasaki Pair Valve Eliminator Type 1 (KPV-E1)
The Woolich Racing PAIR Valve Eliminator allows you to remove the PAIR Valve and PAIR Valve Solenoid from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bike's wiring harness before the ignition is switched back on to prevent fault codes being stored in the ECU.
Supported models:
- 2012-2021 Ninja 650 - 2012-2021 ZX14R - 2013-2017 Ninja 300 - 2014-2021 Ninja 1000 - 2018-2021 Ninja 400 - 2009-2021 ZX6R - 2014-2016 Z1000 - 2015-2018 Versys 1000 - 2015-2021 Vulcan S - 2008-2021 ZX10R - 2016-2021 Versys 650 - 2017-2021 ZX10RR - 2017-2021 Versys X 300 - 2017-2021 Z125 Pro - 2017-2021 Z650 - 2018-2021 Mule Pro FX - 2018-2021 Mule Pro FXR - 2018-2021 Mule Pro FXT - 2018-2021 Teryx - 2018-2021 Teryx 4 - 2019-2021 Mule Pro MX - 2019-2021 W800 Café - 2020-2021 KLX230 - 2020-2021 KLX230R - 2020-2021 KLX300R - 2020-2021 Z400 - 2021 Teryx KRX 1000 - 2008-2021 Concours 14 - 2017-2020 Z900 - 2009-2013 ZX14 - 2018-2020 Z900RS - 2015-2021 H2 - 2019-2021 H2 SX SE - 2020-2021 Versys 1000
|
|
|
Motorcycle Diagnostics - OBD2
|
|
Product
|
Description
|
Price
|
|
OBD2 Diagnostic Scanner (Advanced)
The OBD2 Diagnostic Scanner - Advanced allows you to read and clear fault codes when used in conjunction with the relevant Woolich Racing OBD2 Harness suitable to your bike.
Please note that not all OBD2 Diagnostic Scanners work on Motorcycles. This particular device has been tested by Woolich Racing and it works on the motorcycles where it is listed as a product.
|
Kawasaki OBD2 Harness Type 2
This OBD2 harness allows you to connect to the KDS Diagnostic Plug on the bike and read and clear fault codes using a OBD2 Diagnostic Scanner.
This product is for customers who do not have access to one of our Interfaces but needs to read and clear fault codes. This product is not required if you already have a Woolich Racing Interface and On Bike Harness as we have diagnostics built into the software.
Note: OBD2 Diagnostic Scanner is not included, please see our listings for OBD2 Diagnostic Scanners that we have tested and work for this application.
Compatible with the following models: Kawasaki H2 2015-2024 Kawasaki H2 SX 2018-2021 Kawasaki H2R 2017 Kawasaki H2R 2020 Kawasaki ZX10R 2016-2020 Kawasaki ZX10RR 2017-2020 Kawasaki ZX14R/ZZR1400 2016-2023
|
OBD2 Diagnostic Scanner (Basic)
The OBD2 Diagnostic Scanner - Basic allows you to read and clear fault codes when used in conjunction with the relevant Woolich Racing OBD2 Harness suitable to your bike.
Please note that not all OBD2 Diagnostic Scanners work on Motorcycles. This particular device has been tested by Woolich Racing and it works on the motorcycles where it is listed as a product.
|
|
| Woolich Racing Merchandise |
|
Product
|
Description
|
Price
|
|
Woolich Racing Keytag
Woolich Racing embroidered keytag - easy to retrieve your keys even with bike gloves on!
|
|
| Wideband O2 Products |
|
Product
|
Description
|
Price
|
|
Zeitronix ZT-3 Wideband O2 Kit
Includes - Zeitronix ZT-3 Wideband O2 Controller
- 3 foot O2 sensor harness
- Extended primary O2 sensor harness (easier to fit to motorcycles)
|
Ducati Wideband O2 Installation Kit (Zeitronix) (type 3)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a Ducati V2 motorcycle Includes: - 2 x Wideband O2 sensor bung
- 2 x 12v Automotive Relay
- 2 of each Red and Black 1.5mm Automotive Wire
- 8 * push on terminals
- 4 * 6mm eye connectors
- Heatshrink
- 2 x Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- 2 x Adhesive Velcro for attaching ZT-3
|
Ducati Wideband O2 Installation Kit (Zeitronix) Type 1 (Stainless Steel)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (Stainless Steel Bungs) Includes: - Twin RJ12 cable to connect Zeitronix to Log Box
- Short O2 sensor harness to ZT3
- Ducati Power Harness 1 & 2
- x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Ducati Wideband O2 Installation Kit (Zeitronix) Type 1 (Titanium)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)
Includes: - Twin RJ12 cable to connect Zeitronix to Log Box
- Short O2 sensor harness to ZT3
- Ducati Power Harness 1 & 2
- 2 x O2 TITANIUM Bungs
- Adhesive Velcro for attaching ZT-3 to bike.
|
Ducati Wideband O2 Installation Kit (Zeitronix) Type 2
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Ducati Wideband Power Harness Type 3
- 1 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Honda Wideband O2 Installation Kit (Zeitronix ZT3)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 Kit to relevant Honda models.
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Honda Wideband Power Harness Type 1
- 1 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harness Type 1
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 2)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harnes Type 2
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
KTM Wideband O2 Installation Kit (Zeitronix ZT4)
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models
Includes: - RJ12 cables for connecting ZT-3 to Woolich Racing Products
- KTM Power Harness Type 1
- 2 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-4 to bike.
|
Suzuki Wideband O2 Installation Kit (Zeitronix)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Suzuki Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Woolich Racing Tuning Shop Zeitronix Installation Kit
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung (stainless Steel)
- Wideband O2 sensor bung (Titanium)
- Tuning Shop Power Harness (type 1)
- RJ12 cables for connecting ZT-3 to Woolich Racing Products - 1 x small, 1 x large
- 2 x Narrow band bungs
|
Woolich Racing Zeitronix Installation Kit
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung
- 12v Automotive Relay
- Red and Black 1.5mm Automotive Wire
- 4 * push on terminals
- 2 * 6mm eye connectors
- Heatshrink
- Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
|
Woolich Racing Zeitronix Installation Kit ZT-3 OBD2
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 for motorcycles that use the red OBD plug. Includes: - Wideband O2 sensor bung
- OBD2 Wideband Harness Type 1
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
|
Woolich Racing Zeitronix Installation Kit ZT-4 OBD2
Installation kit for fitting the Zeitronix ZT-4 Wideband O2 for motorcycles that use the red OBD plug. Includes: - Wideband O2 sensor bung
- OBD2 Wideband Harness Type 2
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-4 to bike.
|
Woolich Racing Zeitronix Installation Kit (ZT-4)
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 to a motorcycle Includes: - 2 x Wideband O2 sensor bungs
- Wideband Harness (to connect battery terminal for power)
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-4 to bike.
|
Yamaha Wideband O2 Installation Kit (Zeitronix)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Yamaha Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Zeitronix ZT-4 Dual Wideband O2 Kit
Zeitronix ZT-4 Dual Wideband O2 Controller Kit, with 2 x Zeitronix Wideband O2 Sensor (3 foot cable)
Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3 1 x RJ12 Cable
|
Stainless Steel Wideband O2 Bung
High Quality 18mm Stainless Steel Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
|
Titanium Wideband O2 Bung
High Quality 18mm Titanium Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
|
Wideband Bung Bolt
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed.
|
Wideband Bung Bolt Race
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. This Race version of the bung bolt is light weight and has holes pre-drilled for lock wiring.
|
Narrowband Bung Bolt
The Stainless Steel 12mm Narrowband Bung Bolt allows you to block off a Narrowband O2 bung allowing the Narrowband sensor to be entirely removed from the bike.
|
Narrowband to Wideband O2 Adapter
The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.
Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.
- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location. - O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.
For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.
|
Zeitronix ZR-1 AFR Gauge Blue LED
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Blue LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
|
Zeitronix ZR-1 AFR Gauge Red LED
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Red LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
|
Zeitronix ZR-3 AFR Gauge Blue LED
- Blue digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
|
Zeitronix ZR-3 AFR Gauge Red LED
- Red digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
|
Hacker/Tweaker AFR Display Blue LED
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
|
Hacker/Tweaker AFR Display Red LED
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
|
|
| |
|
|
|
|