|
|
| Product
|
Description
|
Price
|
|
2017-2019 Kawasaki Versys 1000 Race Tools Package
The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: - High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern.
- Shift rod for standard shift configuration*
- Kawasaki Race Tools Harness Type 9 which allows the quickshifter to be plugged into the bikes wiring harness**
- Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software.
Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. ** This harness uses the stock O2 Sensor plug on the bike's harness, the stock O2 sensor should be removed from the bike and disabled in our software *** Pit Speed Limiter harness sold separately
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
|
|
|
|
|
Bin File Definitions - for use in Woolich Racing Tuned software
|
|
Product
|
Description
|
Price
|
|
2012-2014 Kawasaki Versys 1000 Stock Bin File Definitions
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2012-2014 Kawasaki Versys 1000
Note: The WRT software is only available to verified
Woolich accounts. We only verify customer accounts that have purchased
the necessary products (Woolich Log Box or USB interface, along with the
appropriate harness and -if required- a bin file definition key) to
flash their ECU. Accounts with no purchases of the required products can
not be verified.
AU$
110.00
Features available for Kawasaki Versys 1000 2012-2014 - IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Electronic Throttle Valve (ETV) Maps
- RPM Limiter
- Fan Temperature
- Disable Stock O2 Sensor
- Disable Deceleration Fuel Cut
- Disable PAIR Valve / AIS
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers: - 21175-0735 CPA8KPE0
- 21175-0753 CPA8KPF0
- 21175-0781 CPA8KPC0
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
2017-2019 Versys 1000 Stock Bin File Definitions
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2017-2019 Kawasaki Versys 1000.
Note: The WRT software is only available to verified
Woolich accounts. We only verify customer accounts that have purchased
the necessary products (Woolich Log Box or USB interface, along with the
appropriate harness and -if required- a bin file definition key) to
flash their ECU. Accounts with no purchases of the required products can
not be verified.
AU$
110.00
Features available for Kawasaki Versys 1000 2017-2019 - IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Ignition Dwell Map/s
- Secondary Throttle Plate (STP) Opening Maps
- RPM Limiter
- Fan Temperature
- Disable Stock O2 Sensor
- Disable Deceleration Fuel Cut
- Disable PAIR Valve / AIS
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers: - 21175-1218 KPHJK9E0
- 21175-1219 KPHJK9U0
- 21175-1220 KPHJK9L0
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
2020-2023 Versys 1000 Stock Bin File Definitions
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2020-2023 Kawasaki Versys 1000.
Note: The WRT software is only available to verified
Woolich accounts. We only verify customer accounts that have purchased
the necessary products (Woolich Log Box or USB interface, along with the
appropriate harness and -if required- a bin file definition key) to
flash their ECU. Accounts with no purchases of the required products can
not be verified.
AU$
110.00
Features available for Kawasaki Versys 1000 2020-2022 - IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Ignition Dwell Map/s
- Electronic Throttle Valve (ETV) Maps
- Fuel Trim Map/s
- Injector Balance Map/s
- Exhaust Valve Opening Maps
- RPM Limiter
- Fan Temperature
- Disable Stock O2 Sensor
- Disable PAIR Valve / AIS
- Engine Braking Control Maps
- Wheelie Control Maps
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers: - 21175-1414
- 21175-1416
- 21175-1421
- 21175-1498
- 21175-1500
- 21175-1506
- 21175-1842
- 21175-1843
- 21175-1845
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
2015-2016 Kawasaki Versys 1000 Stock Bin File Definitions
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2015-2016 Kawasaki Versys 1000
Note: The WRT software is only available to verified
Woolich accounts. We only verify customer accounts that have purchased
the necessary products (Woolich Log Box or USB interface, along with the
appropriate harness and -if required- a bin file definition key) to
flash their ECU. Accounts with no purchases of the required products can
not be verified.
AU$
110.00
Features available for Kawasaki Versys 1000 2015-2016 - IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Secondary Throttle Plate (STP) Opening Maps
- Secondary Throttle Plate (STP) Closing Maps
- RPM Limiter
- Fan Temperature
- Disable Stock O2 Sensor
- Disable Deceleration Fuel Cut
- Disable PAIR Valve / AIS
- Traction Control Maps
- ECU Mode
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)
ECU Part Numbers: - 21175-0933 CPEEKPE0
- 21175-0952 CPEEKPL0
- 21175-0973 CPEEKPU0
- 21175-0979 CPEEKPT0
- 21175-0980 CPEEKPN0
- 21175-0981 CPEFKPF0
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
|
|
Harnesses
|
|
Product
|
Description
|
Price
|
|
Extension Harness Long
The Extension Harness - Long is a 8 pin Molex (male) to 8 Pin Molex (female) entension harness 1100mm long that allows you to extend the length of all Woolich Racing Harnesses.
|
Extension Harness Short
The Extension Harness - Short is a 8 pin Molex (male) to 8 Pin Molex (female) extension harness 600mm long that allows you to extend the length of all Woolich Racing Harnesses.
|
Kawasaki Bench Harness Type 25 (KBH25 R/W)
The Kawasaki Bench Harness Type 25 comprises of 2 bench harness components, one for writing and one for reading.
Compatible with 2021+ ZX10R, Z H2 2020-2022, ZX4R, ZX4RR 2023-2024.
|
Universal Harness Type 2 (UH-2)
This Universal harness allows you to connect to the 6 pin Red Diagnostic Plug on the bike and read and clear fault codes and view Engine data using a Log Box D v3, USB M v3, Log Box M v3, USB M-Ducv3 and Log Box M-Ducv3
Note: USB v3 and Log Box v3 is not included.
PLEASE NOTE - Universal Harness Type 2 (known previously as Kawasaki Data Harness Type 4)
|
Kawasaki Bench Harness Type 12 (KBH12)
The bench flashing harness allows you to flash ECU's when they are not installed in the bike. The bench flashing harness comes with a 12v power supply plug.
Note: If you have a Z900 ECU with part number 21175-1307 or 21175-1362 you will need the Kawasaki Bench Harness Type 19
|
12V Bench Flashing Power Supply with Type A Plug (USA, Canada, Japan)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type A plug used in USA, Canada, Japan and Mexico.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
12V Bench Flashing Power Supply with Type C plug (Europe, Asia)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type C plug used in most of Europe, parts of Asia, and parts of South America.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
12V Bench Flashing Power Supply with Type I plug (AU, NZ, China)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses.
This product comes with an integrated on/off switch and interchangeable Type I plug used in Australia, New Zealand and mainland China.
Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
12V Bench Flashing Power Supply with Type G plug (UK, Malaysia & Singapore)
This 12V, 1.5A Power Supply (max output 13V) has been designed for use with Woolich Racing Bench Harnesses. This product comes with an integrated on/off switch and interchangeable Type G plug used in the UK, Ireland, Malaysia & Singapore. Input: 100-240V 50/60Hz *This power supply is NOT designed to be used as a battery charger.
|
Kawasaki Exhaust Valve Eliminator Type 1 (KEV-E1)
The Woolich Racing Exhaust Valve Eliminator allows you to remove the Exhaust Valve and Exhaust Valve Servo motor from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU.
Supported models:
- 2020-2021 Z H2
|
Kawasaki O2 Eliminator Type 1 (KO2-E1)
The Woolich Racing O2 Eliminator allows you to remove the O2 Sensor/s from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - 2016-2020 ZX-10R - 2021-2024 ZX10R - 2015-2016 H2 - 2020-2021 Z H2 - 2018-2021 H2 SX - 2020-2021 Versys 1000 - 2024 ZX6R
|
Kawasaki Pair Valve Eliminator Type 1 (KPV-E1)
The Woolich Racing PAIR Valve Eliminator allows you to remove the PAIR Valve and PAIR Valve Solenoid from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bike's wiring harness before the ignition is switched back on to prevent fault codes being stored in the ECU.
Supported models:
- 2012-2021 Ninja 650 - 2012-2021 ZX14R - 2013-2017 Ninja 300 - 2014-2021 Ninja 1000 - 2018-2021 Ninja 400 - 2009-2021 ZX6R - 2014-2016 Z1000 - 2015-2018 Versys 1000 - 2015-2021 Vulcan S - 2008-2021 ZX10R - 2016-2021 Versys 650 - 2017-2021 ZX10RR - 2017-2021 Versys X 300 - 2017-2021 Z125 Pro - 2017-2021 Z650 - 2018-2021 Mule Pro FX - 2018-2021 Mule Pro FXR - 2018-2021 Mule Pro FXT - 2018-2021 Teryx - 2018-2021 Teryx 4 - 2019-2021 Mule Pro MX - 2019-2021 W800 Café - 2020-2021 KLX230 - 2020-2021 KLX230R - 2020-2021 KLX300R - 2020-2021 Z400 - 2021 Teryx KRX 1000 - 2008-2021 Concours 14 - 2017-2020 Z900 - 2009-2013 ZX14 - 2018-2020 Z900RS - 2015-2021 H2 - 2019-2021 H2 SX SE - 2020-2021 Versys 1000
|
|
|
Motorcycle Diagnostics - OBD2
|
|
Product
|
Description
|
Price
|
|
Kawasaki OBD2 Harness Type 4
This OBD2 harness allows you to connect to the 6 Pin Red KDS Diagnostic Plug on the bike and read and clear fault codes using a OBD2 Diagnostic Scanner.
NOTE - This is the same harness as Universal OBD2 Harness Type 1
This product is for customers who do not have access to one of our Interfaces but needs to read and clear fault codes. This product is not required if you already have a Woolich Racing Interface and On Bike Harness as we have diagnostics built into the software.
Note: OBD2 Diagnostic Scanner is not included, please see our listings for OBD2 Diagnostic Scanners that we have tested and work for this application.
Compatible with the following models: Kawasaki Ninja 650/EX650 2020-2022 Kawasaki Z400 2023-2024 Kawasaki Z650 2020 Kawasaki Z900 RS 2020-2021 Kawasaki Ninja 400/EX400 2023
Kawasaki Ninja 500/EX500 2023 Kawasaki Z H2 2020-2023 Kawasaki ZX10R 2021-2023 Kawasaki ZX10RR 2021-2022 Kawasaki ZX-25R 2020-2022 Kawasaki Versys 1000 2021-2022 Kawasaki Z1000SX / Ninja 1000 2020-2022 Kawasaki ZX-4R / ZX-4RR 2023-2024 Kawasaki ZX6R (636) 2021-2024 Kawasaki Ninja 650 / EX650 2023 Kawasaki Z400 2023-2024 Kawasaki Z900 2023
|
OBD2 Diagnostic Scanner (Advanced)
The OBD2 Diagnostic Scanner - Advanced allows you to read and clear fault codes when used in conjunction with the relevant Woolich Racing OBD2 Harness suitable to your bike.
Please note that not all OBD2 Diagnostic Scanners work on Motorcycles. This particular device has been tested by Woolich Racing and it works on the motorcycles where it is listed as a product.
|
Kawasaki OBD2 Harness Type 3
This OBD2 harness allows you to connect to the 6 Pin KDS Diagnostic Plug on the bike and read and clear fault codes using a OBD2 Diagnostic Scanner.
This product is for customers who do not have access to one of our Interfaces but needs to read and clear fault codes. This product is not required if you already have a Woolich Racing Interface and On Bike Harness as we have diagnostics built into the software.
Note: OBD2 Diagnostic Scanner is not included, please see our listings for OBD2 Diagnostic Scanners that we have tested and work for this application.
Compatible with the following models: Kawasaki Versys 1000 2017-2019 Kawasaki Versys X 250 2017-2020 Kawasaki Versys X 300 2017-2023 Kawasaki Z1000 2017-2022 Kawasaki Z1000SX/Ninja 1000 2017-2019 Kawasaki Z900 2017-2020 Kawasaki Z900 RS 2018-2020 Kawasaki ZX6R (636) 2019-2023
|
Universal OBD2 Harness Type 1
This OBD2 harness allows you to connect to the 6 Pin Red Diagnostic Plug on the bike and read and clear fault codes using a OBD2 Diagnostic Scanner.
NOTE - This is the same harness as Kawasaki OBD2 Harness Type 4
This product is for customers who do not have access to one of our Interfaces but needs to read and clear fault codes. This product is not required if you already have a Woolich Racing Interface and On Bike Harness as we have diagnostics built into the software.
Note: OBD2 Diagnostic Scanner is not included, please see our listings for OBD2 Diagnostic Scanners that we have tested and work for this application.
Compatible with the following models:
Kawasaki Ninja 650/EX650 2020-2022 Kawasaki Z400 2023-2024 Kawasaki Z650 2020 Kawasaki Z900 RS 2020-2021 Kawasaki Ninja 400/EX400 2023 Kawasaki Z H2 2020-2023 Kawasaki ZX10R 2021-2023 Kawasaki ZX10RR 2021-2022 Kawasaki ZX-25R 2020-2022
Kawasaki Versys 1000 2021-2022 Kawasaki Z1000SX / Ninja 1000 2020-2022 Kawasaki ZX-4R / ZX-4RR 2023-2024 Kawasaki ZX6R (636) 2021-2024 Kawasaki Ninja 650 / EX650 2023 Kawasaki Z400 2023-2024 Kawasaki Z900 2023 Suzuki DL1050 V-Strom 2020-2022 Suzuki GSX1300R (Hayabusa) 2021-2023 Suzuki GSX-S 1000 2021-2023 Suzuki GSX-S 1000 GT 2021-2023 Yamaha MT-09 2021-2022 Yamaha MT-09 SP 2021-2022 Yamaha MT-09 Tracer 2021-2022 Yamaha MT-09 Tracer GT 2021-2022 Yamaha MT-10 2022-2023 Yamaha MT-10 SP 2022-2023 Yamaha XSR 900 2022-2023 Yamaha YZF-R1 2020-2022
|
OBD2 Diagnostic Scanner (Basic)
The OBD2 Diagnostic Scanner - Basic allows you to read and clear fault codes when used in conjunction with the relevant Woolich Racing OBD2 Harness suitable to your bike.
Please note that not all OBD2 Diagnostic Scanners work on Motorcycles. This particular device has been tested by Woolich Racing and it works on the motorcycles where it is listed as a product.
|
|
| Woolich Racing Merchandise |
|
Product
|
Description
|
Price
|
|
Woolich Racing Keytag
Woolich Racing embroidered keytag - easy to retrieve your keys even with bike gloves on!
|
|
| Wideband O2 Products |
|
Product
|
Description
|
Price
|
|
Zeitronix ZT-3 Wideband O2 Kit
Includes - Zeitronix ZT-3 Wideband O2 Controller
- 3 foot O2 sensor harness
- Extended primary O2 sensor harness (easier to fit to motorcycles)
|
Ducati Wideband O2 Installation Kit (Zeitronix) (type 3)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a Ducati V2 motorcycle Includes: - 2 x Wideband O2 sensor bung
- 2 x 12v Automotive Relay
- 2 of each Red and Black 1.5mm Automotive Wire
- 8 * push on terminals
- 4 * 6mm eye connectors
- Heatshrink
- 2 x Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- 2 x Adhesive Velcro for attaching ZT-3
|
Ducati Wideband O2 Installation Kit (Zeitronix) Type 1 (Stainless Steel)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (Stainless Steel Bungs) Includes: - Twin RJ12 cable to connect Zeitronix to Log Box
- Short O2 sensor harness to ZT3
- Ducati Power Harness 1 & 2
- x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Ducati Wideband O2 Installation Kit (Zeitronix) Type 1 (Titanium)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models (TITANIUM Bungs)
Includes: - Twin RJ12 cable to connect Zeitronix to Log Box
- Short O2 sensor harness to ZT3
- Ducati Power Harness 1 & 2
- 2 x O2 TITANIUM Bungs
- Adhesive Velcro for attaching ZT-3 to bike.
|
Ducati Wideband O2 Installation Kit (Zeitronix) Type 2
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Ducati models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Ducati Wideband Power Harness Type 3
- 1 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Honda Wideband O2 Installation Kit (Zeitronix ZT3)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 Kit to relevant Honda models.
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Honda Wideband Power Harness Type 1
- 1 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harness Type 1
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 2)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Kawasaki Power Harnes Type 2
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
KTM Wideband O2 Installation Kit (Zeitronix ZT4)
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 Kit to relevant KTM models
Includes: - RJ12 cables for connecting ZT-3 to Woolich Racing Products
- KTM Power Harness Type 1
- 2 x O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-4 to bike.
|
Suzuki Wideband O2 Installation Kit (Zeitronix)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Suzuki models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Suzuki Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Woolich Racing Tuning Shop Zeitronix Installation Kit
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung (stainless Steel)
- Wideband O2 sensor bung (Titanium)
- Tuning Shop Power Harness (type 1)
- RJ12 cables for connecting ZT-3 to Woolich Racing Products - 1 x small, 1 x large
- 2 x Narrow band bungs
|
Woolich Racing Zeitronix Installation Kit
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to a motorcycle Includes: - Wideband O2 sensor bung
- 12v Automotive Relay
- Red and Black 1.5mm Automotive Wire
- 4 * push on terminals
- 2 * 6mm eye connectors
- Heatshrink
- Wiretap
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
|
Woolich Racing Zeitronix Installation Kit ZT-3 OBD2
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 for motorcycles that use the red OBD plug. Includes: - Wideband O2 sensor bung
- OBD2 Wideband Harness Type 1
- RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-3 to bike.
|
Woolich Racing Zeitronix Installation Kit ZT-4 OBD2
Installation kit for fitting the Zeitronix ZT-4 Wideband O2 for motorcycles that use the red OBD plug. Includes: - Wideband O2 sensor bung
- OBD2 Wideband Harness Type 2
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-4 to bike.
|
Woolich Racing Zeitronix Installation Kit (ZT-4)
Installation kit for fitting the Zeitronix ZT-4 Dual Wideband O2 to a motorcycle Includes: - 2 x Wideband O2 sensor bungs
- Wideband Harness (to connect battery terminal for power)
- RJ12 cable for connecting ZT-4 to Woolich Racing Products
- Adhesive Velcro for attaching ZT-4 to bike.
|
Yamaha Wideband O2 Installation Kit (Zeitronix)
Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models
Includes: - RJ12 cable for connecting ZT-3 to Woolich Racing Products
- Yamaha Power Harness
- O2 Stainless Steel Bung
- Adhesive Velcro for attaching ZT-3 to bike.
|
Zeitronix ZT-4 Dual Wideband O2 Kit
Zeitronix ZT-4 Dual Wideband O2 Controller Kit, with 2 x Zeitronix Wideband O2 Sensor (3 foot cable)
Woolich Racing - Tuning Shop Zeitronix Power Harness Type 3 1 x RJ12 Cable
|
Stainless Steel Wideband O2 Bung
High Quality 18mm Stainless Steel Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
|
Titanium Wideband O2 Bung
High Quality 18mm Titanium Wideband O2 Bung. You can weld this bung into exhaust systems that do not have a Wideband O2 bung.
|
Wideband Bung Bolt
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed.
|
Wideband Bung Bolt Race
The Stainless Steel Wideband Bung Bolt allows you to block off a Wideband O2 bung when the Wideband O2 sensor is not installed. This Race version of the bung bolt is light weight and has holes pre-drilled for lock wiring.
|
Narrowband Bung Bolt
The Stainless Steel 12mm Narrowband Bung Bolt allows you to block off a Narrowband O2 bung allowing the Narrowband sensor to be entirely removed from the bike.
|
Narrowband to Wideband O2 Adapter
The Narrowband to Wideband O2 sensor adapter screws into a 12mm Narrowband bung, allowing you to use a Wideband O2 sensor with a Narrowband bung.
Please Note: This is a generic item and may not fit all makes/models due to potential clearance issues that arise from the manufacturers' designs. Please ensure you have adequate clearance for the adapter -AND- the O2 sensor when installed in the factory narrowband location.
- O2 Adapter Height: Approximately 32 mm extending vertically when installed in the stock narrowband location. - O2 Sensor Height: Plan for at least 70 mm of additional height on top of the O2 Adapter when the wideband O2 sensor is installed.
For models where clearance could be an issue, it is suggested to use the wideband bung included in the Zeitronix installation kit or find an alternative narrowband to wideband adapter such as the Innovate 12mm to 18mm O2 BUNG ADAPTER, P/N 38350 which angles the sensor to help potentially alleviate any clearance issues.
|
Zeitronix ZR-1 AFR Gauge Blue LED
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Blue LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
|
Zeitronix ZR-1 AFR Gauge Red LED
- Stylish, machined, anodized black bezel and slim enclosure
- High contrast Red LED display
- Large 0.4" (10mm) digits
- Slim design for flexible gauge mounting options
- Programmable to startup as an AFR or Lambda gauge
- Peak and Hold feature
- RJ12 Splitter cable included
|
Zeitronix ZR-3 AFR Gauge Blue LED
- Blue digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
|
Zeitronix ZR-3 AFR Gauge Red LED
- Red digital AFR readout with large 0.4" (10mm) digits
- Slim 0.75" (19mm) design
- High contrast display visible even in direct sunlight
- RJ12 Splitter cable included
|
Hacker/Tweaker AFR Display Blue LED
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
|
Hacker/Tweaker AFR Display Red LED
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-3 DATA port. RJ12 splitter cable included.
Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case.
|
|
| |
|
|
|
|